Medication info

BSSPLUS Solution

Prescription medicationSolutionExternal use
Ingredient · strength
Anhydrous Dibasic Sodium Phosphate›43.3mg / 100mLSodium Bicarbonate›219mg / 100mLPotassium Chloride›39.5mg / 100mLSodium Chloride›744mg / 100mLGlutathione Disulfide›460mg / 100mLMagnesium Chloride›500mg / 100mLGlucose›2300mg / 100mLCalcium Chloride›385mg / 100mL
Manufacturer / importer
Alcon Korea Ltd.
Appearance
Component 1: A colorless, transparent solution in a colorless, transparent bottle. Component 2: A colorless, transparent solution in a colorless, transparent vial.
Packaging
Component 1 - 480 milliliters/bottle, Component 2 - 20 milliliters/vial
Approval status
Active

MFDS item code 199403260 · Notified 1994.05.26 · Insurance code 652400300

Summary

Main use
Irrigation during ophthalmic surgery
Who uses it
Adults
Adult use
Remove the blue caps from the 1-solution bottle (480mL) and the 2-solution vial (20mL), then clean and disinfect the rubber stoppers using sterile alcohol swabs. Using the 'vacuum transfer device' prepared under aseptic conditions or a 20mL syringe, transfer 20mL of the 2-solution vial into the 1-solution bottle, and gently shake to mix thoroughly. Close the bottle with a sterile stopper, then label it with the date and time of mixing and the name of the patient for whom it is intended. Use this irrigation preparation according to the method specified for the type of surgery. As the container has no separate air inlet, use an IV set with an air inlet in the plastic spike and follow the instructions for the special IV set used. Insert the spike into the container through the center of the rubber stopper using aseptic technique. Before beginning intraocular irrigation, allow the solution to flow out to remove air from the tubing. Use this solution within 6 hours after mixing.

Ingredients

Importer
Alcon Korea Ltd.

Efficacy & effects

Irrigation during ophthalmic surgery

View approved original text

Irrigation solution is used during ophthalmic surgeries to protect the structure of the eye and maintain a clean surgical environment. The irrigation solution serves to wash the interior of the eye and regulate blood flow, minimizing tissue damage during the surgical process. This solution is primarily used in cataract surgeries and retinal surgeries. Hence, it helps create a safe and effective surgical environment during ophthalmic surgeries.

How to use

Adult use

Remove the blue caps from the 1-solution bottle (480mL) and the 2-solution vial (20mL), then clean and disinfect the rubber stoppers using sterile alcohol swabs. Using the 'vacuum transfer device' prepared under aseptic conditions or a 20mL syringe, transfer 20mL of the 2-solution vial into the 1-solution bottle, and gently shake to mix thoroughly. Close the bottle with a sterile stopper, then label it with the date and time of mixing and the name of the patient for whom it is intended. Use this irrigation preparation according to the method specified for the type of surgery. As the container has no separate air inlet, use an IV set with an air inlet in the plastic spike and follow the instructions for the special IV set used. Insert the spike into the container through the center of the rubber stopper using aseptic technique. Before beginning intraocular irrigation, allow the solution to flow out to remove air from the tubing. Use this solution within 6 hours after mixing.

Precautions

This medication should not be used by patients who have allergic reactions to its components. Special caution is needed when used by diabetic patients or patients with damaged corneal endothelial cells. During use, corneal edema, reduced corneal function, or post-surgical inflammatory reactions may occur, so if any abnormal symptoms appear, medical consultation should be sought immediately. Ocular-related side effects such as increased intraocular pressure have been reported with this medication, so regular ophthalmic exams may be necessary. To minimize damage to the cornea and other ocular tissues during surgery, the prescribed dosage and method should be strictly adhered to. The infusion set used with this medication contains natural rubber latex, so caution is required for individuals with latex allergies. When diabetic patients undergo vitrectomy while using this medication, changes in the lens may occur, so it should be used with caution. Post-surgery, corneal opacity or edema may develop, so appropriate management is necessary to prevent these complications. Temporary blurred vision may occur after surgery; therefore, driving or operating machinery should be avoided until vision is fully restored. There is insufficient safety data regarding the use of this medication in pregnant women; however, as it contains components present in the eye and has no pharmacological action, it is expected to have minimal reproductive effects. Though insufficient data exists on whether this medication is excreted in breast milk, it is projected to have little impact on neonates due to its lack of pharmacological activity. In pediatric patients, similar safety has been observed relative to adults. This medication should only be used as an irrigating solution during ophthalmic surgery and must not be administered intravenously. Each package is intended for use by a single patient only, and any remaining contents should be discarded. As it does not contain preservatives, it cannot be reused once opened, and it should not be used if the solution is cloudy or not in a vacuum-sealed state. It should be used only after Components 1 and 2 are completely mixed, and it should not be used if the vacuum state is not maintained. If the mixed solution is discolored or contains precipitates, it should not be used, and it must be discarded if not used within 6 hours after mixing. Do not mix with other substances, as this may cause damage to the ocular tissues.

Side effects

  • Corneal edema
  • corneal dysfunction
  • postoperative inflammatory response
  • loss of corneal endothelial cells
  • increased intraocular pressure

Not everyone experiences these, and they can vary from person to person.

Storage

This medication should be stored at a cool temperature between 2 degrees and 25 degrees Celsius, and it is important to keep it sealed in a container that allows no air to enter. This will help maintain the effectiveness of the medication and prevent degradation.

Appearance and packaging

Appearance

Component 1: A colorless, transparent solution in a colorless, transparent bottle. Component 2: A colorless, transparent solution in a colorless, transparent vial.

Package unit

Component 1 - 480 milliliters/bottle, Component 2 - 20 milliliters/vial

Questions about this medicine

No questions yet.

For anything that needs medical judgment, consult a doctor or pharmacist.

Related searches

Search tags

Suggested searches

This drug information is based on data provided by the Korea Ministry of Food and Drug Safety.
Consult a doctor or pharmacist for accurate dosage, administration, and usage instructions.