Cashdoc unified search page
966 search results for 울쎄라 리프팅
Treatment/surgery tips 21 items
If you're worried about the price of Ulthera or Thermage, here are some cost-effective face-lifting treatments you can get instead.[4]
The first problem that users who are looking for a face lifting procedure face is Value for money no see. Ulthera and Thermage are representative expensive lifting devices, but due to the cost and pain, alternative treatments are often considered. 1. The concept of high-priced lifting (Ulthera, Thermage) and cost-effective alternative treatments Ulthera and Thermage deliver thermal stimulation to the skin. This is a representative equipment treatment that induces skin contraction and lifting. The features are as follows: A one-time cost may exceed 2 to 3 million won. Existence of pain burden High cost of equipment and consumables Because of this Domestic equipment, high-frequency equipment, injection treatment, etc. Alternative treatments that are cost-effective are also mentioned. 2. How 5 Cost-Effective Lifting Procedures Work 2-1. Domestically produced ultrasound equipment (Shrink, Double, Liftera, etc.) principle Focus ultrasound on one point to create a thermal coagulation point Skin contraction → Inducing a lifting effect Structure similar to Ulthera characteristic It is possible to form a price at about 1/10 of that of Ulthera. The perceived effectiveness is said to be around 60-80%. Relatively little downtime 2-2. Inmode (high-frequency lifting) principle Heating the inside of the skin through high-frequency energy Simultaneous tightening and lifting effects are possible. characteristic High-frequency based, similar to Thermage After the equipment was distributed, the price range became relatively low. Results may vary depending on the skill of the practitioner. 2-3. Thermage-like equipment (Oligio, Tensorma, Density) principle High-frequency thermal stimulation → skin contraction (tightening) Similar to the working principle of Thermage characteristic 500,000 to 600,000 won The maintenance period may be shorter Thermage has more energy efficiency and data accumulation. 2-4. Botox (reverse lifting) principle Decreased muscle movement → decreased force pulling the face down A lifting effect can be felt on the jawline and facial contours. characteristic Often used in conjunction with high-priced lifting procedures The economic burden is relatively low 2-5. Filler (volume-based tightening) principle A method of physically stretching the skin by filling in volume Heat-based lifting and other approaches characteristic Mentioned as an alternative for those with thin facial skin Relatively controllable as a meltable substance Used for volume supplementation purposes 3. Note: Selection criteria may vary depending on facial condition. 3-1. If you have thin facial skin Strong tightening/lifting treatments may not be positive It is explained that fillers and botox are considered as alternatives. 3-2. Practitioner dependence Especially, equipment treatments such as Inmode The effectiveness may vary depending on who performs the procedure. 3-3. Difference in maintenance period Cost-effective equipment is better than expensive equipment. The maintenance period may be shorter. 3-4. Possibility of bruising and swelling There is a possibility of bruising during high-frequency treatment. Minor downtime, such as swelling, may occur. 4. Summary: When to Consider Cost-Effective Lifting Here is the key summary. Ulthera alternative: domestically produced ultrasound equipment Thermage alternatives: high-frequency equipment and similar equipment Facial Fat Loss: A Filler-Centric Approach High Cost Burden: A Concurrent Botox Strategy in other words, One piece of equipment is not an absolute replacement, but the choice depends on facial structure + budget + purpose. no see. Expensive equipment has advantages in terms of precision and energy efficiency, but Cost-effective treatment is mentioned as a realistic option from a repeat treatment or cost management perspective. There are many cases where decisions are made by comparing actual experiences such as facial lines, volume status, and budget range. 👇 Actual shrink View all lifting reviews It was painful after the shrink treatment at Suwon Maypure Clinic, but I am looking forward to it! Reviews of Inmode and Shrink treatments at Eight Plastic Surgery Clinic in Gangnam-gu Experience with shrinkage and scar management at Lyocell Clinic in Gangnam-gu
캐시닥 운영진26.02.20Views 249Likes 4 Ultherapy Prime vs. Onda Lifting: A Real-World Guide to Which Treatment is Best for Your Facial Concerns
Ultherapy Prime vs. Onda Lifting: both procedures are frequently mentioned for 'lifting,' but How it works · Key effects · Recommended for This is completely different. 1) Reasons why comparison is necessary Many people ask, “What is the difference between Ulthera and Onda?”, The two procedures are Equipment with different purposes, not subject to simple comparison no see. two procedures Principles, Feel, Design Method, Recommended for We will clearly distinguish between them to make it easier to organize the concerns of Cashdoc members! 2) Ultherapy Prime (commonly called 'Ulthera') ✔ Key Summary method: High-intensity focused ultrasound (HIFU) core: thermal solidification point SMAS stimulation + fat-compressing lifting design: While looking at the ultrasound screen A procedure meticulously designed shot by shot feel: There may be some pain. Recommended for: Late 20s to 30s and older, Sagging + localized volume principle A structure that focuses and shoots ultrasound waves at a 'single point', much like a magnifying glass focusing light (HIFU). At about 65–70°C thermal freezing point The key is to make it. This freezing point Pressing down on the fat or It creates a lift by pulling the SMAS. Design characteristics Apply the gel, and look at the screen Fixed–Shoot–Move Proceeding in the form. Based on skilled practitioner standards, Static procedure enabling delicate design . Ultrasonic resolution has been improved with the recent upgrade to Prime. Giving a feeling The pain is “not tremendous, but somewhat present.” I tend to maintain it about once or twice a year. Which face type suits it best? Late 20s to 30s and older when initial sagging begins When there is volume in places and an overall flowing feel If the design fits, satisfaction tends to be high. If you already have little cheek fat or a thin face, it seems necessary to be more careful in determining the design direction. 3) Onda Lifting ✔ Key Summary method: microwaves (electromagnetic waves) core: Fat destruction + tightening design: A contouring method that applies oil and continuously moves the tip. feel: Almost no pain, almost no downtime Recommended for: For those in their early to mid-20s with a lot of baby fat or cheek fat, or with overall facial volume principle Use of electromagnetic waves in the form of microwaves. The tip is Shallow depth · Deep depth It is divided into two types (e.g., 3mm / 7mm), Delivers heat to the entire face fat destruction Light tightening Induces. Design method Apply oil Moving sweeping form The procedure. Refining the overall facial lines It is similar to a contouring procedure. . There are almost no visible marks from the procedure, and even slight redness tends to disappear quickly. Feelings/Giving Almost no pain. There is almost no downtime, so... Procedures that can be received more frequently You can understand it as follows. Which face does it fit? Early to mid-20s · Baby fat · Round face · Voluminous face If you want your face to look smaller especially double chin Jawline volume For many people, the feeling of slimming down starts from the first week. ⚠️ Structural points to note The 7mm deep tip is quite effective at destroying fat, For women with small faces or little body fat, it may be difficult to completely avoid the areas they wish to avoid. (Typically, areas of concern for ball indentation). 4) Key Differences Between the Two Procedures at a Glance item Ultherapy Prime Onda Lifting method Ultrasound (HIFU) microwaves (electromagnetic waves) Key Effects Lifting, Tightening, Fat Reduction Fat destruction and tightening pain Somewhat almost none Treatment cycle 1 to 2 times a year possible more often design Designing static 'shots' while watching the screen Move the tip to contour the entire line Recommended for Late 20s to 30s+, mixed sagging and volume Early to mid-20s, cases with a lot of volume and a double chin merit Powerful lifting · Delicate design Almost no pain · Slimming effect 5) Selection Guide When considering the two procedures, asking yourself the following questions will clarify the matter. ✔ 1) Is my concern 'sagging'? → Ultherapy Prime It is closer to. ✔ 2) Is my concern 'overall volume, double chin, and a wide face silhouette'? → Onda Lifting This is closer. ✔ 3) If both apply? Depending on the case, the amounts of the two procedures are adjusted and performed in combination. Ultherapy Prime Lifting focused on sagging and the fascia layer, precise design, recommended for late 20s to 30s and older Onda Lifting : Fat-destroying central slimming effect, virtually painless, suitable for early to mid-20s or voluminous faces It is not a matter of “which one is better” between the two procedures, The choice depends on whether my face is 'sagging-based' or 'volume-based'.
캐시닥 운영진26.01.14Views 105Likes 0 Should I just endure the Ultherapy pain? 😣 From anesthesia types and pain levels to relief methods, everything you need to know in one go![7]
Are you worried about the pain after booking Ultherapy? Based on actual procedure experience All About Ultherapy Pain I honestly summarized it 🙌 How painful is Ulthera? Ulthera is a lifting procedure that focuses ultrasound energy on the deep layer (4.5mm) of the skin. As much as strong energy is transmitted to this deep layer, Pain is Ulthera's biggest drawback. dot It is considered to be. Pain tends to be felt more severely, especially in the lower facial area (jawline and below the cheeks). Although it varies from person to person, many people describe the pain as a recurring tingling sensation like an electric shock. region Pain intensity characteristic forehead and temples ★★★☆☆ A relatively tolerable level cheeks and cheekbones ★★★★☆ Repeated stinging and tingling lower face (jawline) ★★★★★ The area with the strongest pain Neck and décolleté ★★★☆☆ Strengthens when performed near bone Complete Comparison of 3 Types of Anesthesia Anesthesia to reduce Ultherapy pain is broadly divided into three types. Be sure to understand the advantages and disadvantages of each and choose the method that suits you best. Types of anesthesia effect merit disadvantage anesthetic ointment △ Normal Simple, low cost Ineffective against strong energy Injectable anesthesia ○ Good No fasting required, rapid recovery Injection site is important, caution is required sleep anesthesia ◎ Best Almost no pain Fasting is mandatory, recovery time is required 💡 Specialist-Recommended Anesthesia Method After anesthetic ointment A method combining injection anesthesia This offers the best balance in terms of effectiveness and safety. Sedation anesthesia is recommended for those with very high pain sensitivity and must be performed after fasting. ⚠️ Caution when using injection anesthesia! If the anesthetic injection is injected into a shallow layer within 4.5 mm, the tissue may expand, causing the depth of the procedure to be distorted. certainly Inject into deep layers Please receive treatment from skilled medical professionals. The relationship between energy intensity and pain The effectiveness of Ulthera is directly related to energy intensity. Based on the lower face Maximum energy 1.2 joules (J) Performing the procedure yields the best long-term results. It is sometimes lowered to 1.0 joule only in cases where the skin is thin or there is little fat. Hospitals that commonly advertise "painless Ulthera" use a method of lowering the energy and increasing the number of shots. but Strong Energy 300 Shots > Weak Energy 600 Shots It is often effective. Selecting the right energy is important for both cost reduction and maximizing effectiveness. Ulthera Pain Relief & Post-Procedure Care You can effectively reduce pain and swelling by practicing the following methods before and after the procedure. ✅ Pain Relief Management Methods Before the procedure Take painkillers (after consulting a specialist), get enough sleep and fluids. Immediately after the procedure : Apply a cold compress for 10–15 minutes, and avoid spicy foods and alcohol. 1 week after the procedure Avoid strenuous exercise and saunas, and strictly protect yourself from UV rays. Continuous management Supports skin recovery with moisturizing and nourishing cream Precautions regarding Ulthera pain-related side effects Although Ultherapy is a highly safe procedure, please be aware of the potential side effects that may occur along with pain. symptoms Duration coping methods Swelling and redness Several hours to 2 days Cold compress, minimize irritation A tingling sensation 1~2 weeks Mostly natural recovery Temporary skin sagging 2~4 weeks Waiting for collagen regeneration Nerve irritation pain Rarely several weeks Consultation with a medical professional is essential. Summary at a Glance 📌 Key Summary ① Ulthera pain is Most strongly in the lower facial area I can feel it ② Anesthesia is Ointment + Injection Combination This is the most recommended for its balance of efficacy and safety. ③ High energy, few shots It is more effective than low energy and many shots. ④ After the procedure Cold compress, moisturizing, and UV protection It helps with recovery ⑤ If abnormal symptoms persist, you must Consult with your medical team. do Don't give up on Ulthera just because you're scared of the pain! If you consult thoroughly with a specialist regarding the anesthesia method and energy setting that suits you... Ulthera, which increases effectiveness and reduces pain It is possible 💪 Please leave any questions in the comments! Let's share information together 🙌 See more Ulthera reviews in the Cashdoc Community > A satisfying Ultherapy lifting experience at Onleaf Plastic Surgery in Seocho-gu A real review of the before and after difference from receiving Ulthera firsthand. It was my first Ulthera Gold treatment at Transparent Skin Clinic in Gangnam-gu!
캐시닥 운영진26.04.08Views 310Likes 2 The Difference Between Nose Lifting and Rhinoplasty: A Must-See for Anyone Who Wants Natural Changes[4]
The most confusing choice when considering nose surgery is Rhinoplasty vs. Nose Lift no see. Although it is the same “nose improvement,” the direction of the results, maintenance period, and recovery method are completely different, so the selection criteria will vary depending on your condition and purpose. Especially for common concerns among Asians, such as a low nose or droopy nose tip, it is important to first understand the selection criteria. 📌 The basic difference between rhinoplasty and nose job lifting Rhinoplasty is a surgical procedure that uses nasal cartilage or implants to create a shape through incisions and excisions. On the other hand, nose thread lifting is a procedure that naturally improves the shape of the nose through needle holes inside or outside the nose using dissolvable thread. 💡 How does the shape of your nose change? Rhinoplasty surgery corrects the structure itself. Distinct and high nose shape This is how it is made. It is used to improve various nasal problems at once, such as a beak nose, a crooked nose, and a bulbous nose. Nose thread lifting is a method of supporting the bridge and tip of the nose using thread. We aim to provide improvement in the right direction for cases where natural changes are desired, such as a low nose bridge, low nose tip, or arrow nose. ⏱️ Differences in treatment time and recovery rhinoplasty surgery Time required for incisional and open surgery Swelling and bruising may last a long time. nose lifting Shortening the procedure time by performing the procedure through a needle hole There is minimal bleeding and bruising, and the return to daily life is quick. A natural change that makes it difficult to tell that the procedure has been performed 📅 Difference in maintenance period rhinoplasty surgery Use of nasal cartilage or implants Semi-permanent maintenance period nose lifting Use of melting thread It will return to its original form after some time. Natural changes are possible in line with facial aging changes. ⚠️ Note: Criteria to consider before choosing The desired result Is it a distinct change or a natural change? Whether it is necessary to return to daily life immediately after the procedure The burden of putting a knife to the nose Preference for long-term maintenance vs. changeability Especially if you want to keep the same nose shape for a long time, When considering natural changes that come with aging, the direction of choice may be different. 🧭 Summary: If these criteria are used, the selection direction will change. Want a very high and distinct nose → Consider rhinoplasty Want a natural, unnoticeable change → Consider nose lifting A quick recovery and return to normal life are important → Considering the direction of nose lifting No aversion to implants and surgery → Can choose rhinoplasty surgery Compare the condition of your nose, desired results, maintenance period, and recovery period together. It helps you determine which treatment criteria are best suited for you. 👇 See actual nose lifting reviews Hongdae nose lift, Formico, self-funded review - beak correction + flat nose bridge, honest disclosure of 3-week transformation timeline Honest Review of Hongdae Nose Lifting with Formico and Lorient Filler: The Process of Saving My Nose Line Without Surgery, Revealing the Complete 2-Week Results Hongdae Nose Lifting Review | Real Before and After Results of Formico's Beak and Bulbous Nose Line Correction (5 Days) Hongdae Dermatology Clinic's Formico and Lorient Fillers: Real Reviews of Natural Looks from Day One to Two Weeks Later
캐시닥 운영진26.02.20Views 111Likes 4 Shrink 300 Shot Lifting: Principles, Effects, and Side Effects All in One Place[4]
Like facial elasticity, double chin, or sulking Feeling sagging due to the weight of fat The procedure that is searched for the most when you are concerned about this is shrinking. In particular, many people search for information based on the number of shots, such as 'Shrink 300 shots', but it is important to understand the principles of the procedure and precautions. 1. What is shrinkage (definition) Shrink focuses ultrasound energy inside the skin. Ultrasound-based treatment that promotes collagen regeneration and lifting no see. Not the outer skin Stimulates the inner skin How to do it For the purpose of improving elasticity in areas of sagging face Known as a cost-effective treatment with relatively widely available equipment Strictly speaking, it is not a ‘lifting laser’ but rather an ultrasound device that provides thermal stimulation to the tissues inside the skin. 2. The core principle of shrinking (magnifying glass principle) The working principle of shrinking is often explained as the 'magnifying glass principle'. Focusing ultrasound energy on one point Contraction of the tissues inside the skin During the subsequent regeneration process, collagen condensation → elasticity induction In this process There is little external damage to the skin The internal regenerative response is central. Additionally, the depth can be adjusted, so when stimulating areas with a lot of fat, weight loss and elasticity increase occur simultaneously, creating an effect that looks like lifting. 3. What does Shrink 300 Shots mean (understanding the number of shots)? In the context of treatment, a 'shot' is a unit of energy exposure. 1 shot = 10 dots For the entire face: Usually 300-400 shots In many cases, up to 500 to 600 shots are taken. in other words, The more shots there are, the more energy is invested. no see. especially If you have a lot of fat on your face Sagging areas such as double chin, nasolabial folds, and frown lines In order to achieve a slimming effect and a close feeling, the number of shots must be sufficient. 4. Differences with Ulthera (Why it is often compared) Shrink and Ulthera Ultrasound treatment with similar principles no see. Key Differences Wellthera: Treatment while watching the ultrasound screen Shrink: No screen function (relatively cheap) also Well, the energy uniformity is high. Shrinkage can have relatively uneven energy output so 1~2 strong treatments → Select Ulthera Focus on consistent management → Select shrink It is often mentioned as a standard. 5. Time of effect onset and treatment cycle Shrink is more than an immediate dramatic change. Regeneration response after time elapses This is the feature. Effects felt: after about 1 month Maintenance period: approximately 6 months on average Initial recommendation: 3 times at 1-2 month intervals Maintenance: About twice a year It has characteristics closer to a consistent management treatment rather than a one-time, large-scale change. 6. Recommended and Not Recommended Targets When recommended If you have a lot of facial fat If the wrinkles on the forehead are caused by fat weight grumpy sagging Double chin concerns Early stage of elasticity loss If not recommended If you have very little facial fat Face shape without cheek fat In this case, the fat reduction effect may actually feel off. 7. Side effects and precautions you must know ① Risk of using regeneration tips Possibility of uneven energy output Increased risk of side effects such as burns ② Excessively dense treatment If the gap is too narrow, excessive tissue contraction occurs. Skin peeling (sunburn) may occur ③ Effect of treatment skill Shrink is Investigation of precise location fixation Tip tight Adjust shots by part This process is important, and depending on your skill level, there may be differences in effectiveness and side effects. 8. Pain and actual sensation characteristics The stronger the energy, the more pain there is. A structure in which the effect and pain are proportional The procedure takes approximately 10 minutes (based on 300-400 shots) Also, if you move while examining, the energy may be dispersed and the effect may be reduced. organize Ultrasound-induced skin contraction → regeneration-induced structure Suitable for sagging face with fat 300 shots is the basic treatment range for the entire face. The effect is gradual, rather than immediate, after a month. Regeneration tips, excessive shot density, and skill are major risks Since the perceived results may vary depending on whether the cause of sagging is fat weight or loss of elasticity, it is important to set the treatment range according to the face type. In cases where concerns differ by area, such as double chin, nasolabial folds, or sulcus, the actual difference in reviews also tends to be large. 👇 See real shrink reviews An honest review of how long the shrink lasts The 600-shot shrink at Bucheon Maypure Clinic had no effect. The shrink effect and detailed treatment and procedure review experienced at the Jamsil branch of the YU&I Dermatology Clinic.
캐시닥 운영진26.02.19Views 108Likes 4 The price of Ulthera varies by hospital and the appropriate cost for 300 shots.[5]
If you search for prices, you may notice a large difference in prices between hospitals. Why is it so different even though it's the same 300 shots? If you don't understand this difference, it's easy to end up simply comparing numbers. 📌 What is the appropriate price range for Ulthera? Well, the appropriate price range for 300 shots is 1 million to 1.5 million won. no see. However, this amount is not determined solely by the number of shots, but may vary depending on factors such as: Well, the price structure changes The cost of the Ulthera treatment is not simply the cost of using the equipment. Treatment time, procedure, and whether genuine products were used are reflected together. Key factors that create price differences ① Time invested in the procedure In time Consultation time + actual treatment time This includes: If you invest more than 20-30 minutes in one patient Includes a design process that checks the skin layer using ultrasound Energy control by observing skin reaction The longer the time spent with a patient, the fewer patients the hospital can see in the same amount of time. So there may be a cost difference. ② Differences in treatment style Fast-paced One-size-fits-all approach Checking the skin layer and custom designing personalized approach The procedure itself takes time because it involves checking the skin layer with ultrasound, selecting the tip, and adjusting the energy. Pricing structure may vary depending on whether this design process is included. ③ Whether to use playback tips Well, the tip is 2,400 shots This is included and if you use them all, you will need to use a new product. Remanufactured tips are not genuine as they are recycled tips with a different appearance and may have lower output and power. So if the price is ridiculously low, you need to check this out. Note: How to verify authenticity ✔ Verify the certificate of authenticity If you use genuine tips Certificate of genuine treatment is provided. Depending on the number of shots Genuine sticker Check if a sticker is included You need to check this part to determine whether you are using a genuine tip. ✔ Monitoring the treatment process Because Ulthera has high energy, it is sometimes used in conjunction with general anesthesia. If you are concerned about the number of shots Monitor records before starting the procedure Request for confirmation video just before the end of the procedure You can keep a record in this way. ✔ Possibility of fake machine Since the laser machine and tip itself are expensive equipment, an excessively low price may warrant a check on the machine's condition. For fake machines, there may be no ultrasound and only a still image may be displayed. rational choice criteria A high price doesn't necessarily mean good, and a low price doesn't necessarily mean bad. The factors that are important to consider are: Whether sufficient consultation is taking place Does the director personally check the process before and after the procedure? Whether it is carried out responsibly from beginning to end If the procedure is performed without consultation, it may be difficult to understand the procedure. Factors to consider when running in parallel Basic home care (abstinence from alcohol, smoking, use of nourishing creams, sunscreen) can help maintain the effects of the treatment. A good concurrent treatment is Rejuran (helps regenerate collagen and improve elasticity) Botox placed shallowly on the skin There are etc. This part may also be guided differently depending on individual circumstances. 📌 So why do the prices differ from hospital to hospital? Treatment time Whether it is custom designed or not Use genuine tips Machine condition Counseling process This is because these factors work in combination. So, prices are often different for each person. These differences will vary depending on the actual case. 👇 See real visitor reviews I would like to share the effects of Ulthera and my experience. Review of 3 visits to Ulthera, a transparent skin clinic in Yeoksam-dong, Gangnam-gu! Ulthera prices at a glance: 300-shot, 600-shot, and Thermage comparisons
캐시닥 운영진26.02.13Views 159Likes 4 Well, if you've searched for Thermage, there are some criteria you should know before getting it done.[5]
Well, Thermage is mentioned as a representative lifting equipment. but Because the energy methods and target groups are different , Results may vary depending on skin type. So, rather than asking “which equipment is better,” the question comes first: “what kind of energy does my skin need?” Why is understanding your gear important? Lifting is ultimately Where and how is heat transferred? It's a problem. collagen fibers fat cells Superficial Muscle Mass (SMAS) Among these The purpose varies depending on which layer is being heated. Depending on the energy source, it is broadly divided into four types. Ultrasound (HIFU) Radio Frequency (RF) laser microwave If you choose without knowing this difference, you may not be as satisfied as you expected even if you increase the number of shots. Definition: What makes lifting equipment different? Lifting is a procedure that uses energy to heat specific layers. Depending on the energy method, the area of action and purpose are different. Principle: How it works by energy ① Ultrasound (HIFU) Featured Equipment: Well, shrink Focusing energy on one point like a convex lens Create hot spots to target the superficial muscular aponeurotic system (SMAS) layer 📌 If your facial line is broken 📌 This method is used when there is a little bit of fat. The 4.5mm tip targets the fascia layer rather than hitting the muscle. It is important to get the layers right. ② High frequency (RF) Featured Equipment: Thermage, Density, Serf Heat generation through current flow Targeting the dermis and shallow fat layer 📌 Improved skin texture 📌 Fine wrinkles 📌 Used for the purpose of improving elasticity. High frequency is not inherently intended for deep penetration. Considered if you want to improve elasticity in dry skin. ③ Laser Featured Equipment: titanium Widen the spot for deep heat transfer Parallel cooling 📌 If you have thin skin 📌 If you want immediate lifting and whitening Depth transmission varies depending on pressure control. ④ Microwave Featured Equipment: Coming Similar principle to a microwave oven Heat transfer to the fat layer 📌 If your face is thick and has a lot of fat 📌 For fat reduction purposes It is also mentioned as an alternative in cases where the effect was not great even after performing multiple shots of Ulthera. Note: Results may vary depending on skin type. ✔ If you have a lot of fat Even if you progress through 600 or 1000 shots of Ulthera, there are cases where you feel that the line does not change much. ✔ If you have thin skin If you are the type that does not want to induce fat loss, then high frequency method is more suitable. ✔ Thick skin type Titanium may not be an option if you have thick or fatty skin. ✔ Increase in combination treatments Recently Titanium + Ulthera Come + Ulthera There are also many cases where they are combined like this. Where is the location of Ulthera Thermage? Ulthera and Thermage are still well-known in the lifting field. but, High frequency equipment also follows 6.78MHz. There are also devices that add 2MHz. There are also devices that combine monopolar and bipolar. Domestically produced equipment is also appearing with competitive prices. So, it is not a “replacement device”, but a structure designed with different energy characteristics for each. In the end, what matters is ✔ Where is the heat transferred? ✔ Skin thickness and fat content ✔ Whether the purpose is to straighten the lines, improve elasticity, or reduce fat These differences will vary depending on the actual case. 👇 See real Ulthera reviews I'm sharing my experience with the Ulthera treatment. Experience comfortable Ulthera treatment at Haeundae Base Dermatology Clinic Seocho-gu AB Plastic Surgery Clinic: Satisfied with jawline improvement after Ulthera treatment 👇 See actual Thermage reviews Thermage Review｜Curious about Thermage price, effectiveness, pain, and Ulthera differences? When will Thermage effects begin to appear? A summary of the 2-week to 3-month change period. I received Thermage lifting treatment at Tatoa Clinic.
캐시닥 운영진26.02.13Views 98Likes 4 Differences between Softwave Lifting[5]
It's the same lifting procedure, but if you look at the reviews, “It’s more natural than I thought.” , “The contour is less defined, but fine wrinkles have improved.” , and some people say “there was almost no pain.” Even though the equipment has the same name, the feeling, effect, and price are so different because the treatment method itself touches different points. What is Softwave Lifting? Softwave is a treatment that uses ultrasound energy to improve skin elasticity and fine wrinkles. Rather than pulling hard, we approach it by delivering energy to specific layers within the skin. Key points that make a difference Depth of energy reach Lifting equipment is grouped under the same 'lifting' but in reality The depth of the skin where energy is transmitted is different. Well, what a surprise Sometimes it targets deep layers. Thermage It works by focusing on changes on the surface of the skin. Softwave is in the middle middle layer of the dermis It targets . So, which part you feel more: contour change, fine wrinkles, or skin texture improvement may vary. Energy transfer method Softwave is not a dot-like method. A structure in which multiple columns are distributed in parallel Energy is transferred to . Because of this, it sometimes acts relatively evenly on the entire skin rather than stimulating only a specific area strongly. Because damage to the epidermis is minimal, it is possible to return to daily life immediately after the procedure. The difference between feeling and recovery After the Softwave treatment, redness or a feeling of heat may appear, but in most cases, it will subside within a short period of time. Some people feel an immediate pull, while others notice gradual changes over several weeks. This difference is perceived differently depending on the individual's skin condition and expectations. A point that is easy to get confused about If you expected contour lifting but instead feel like you're focusing on fine wrinkles If you feel that the effect is weak due to little pain If recommended in conjunction with other lifting Because each piece of equipment has a different role, explanations and guidance often differ depending on whether it is a standalone or combined treatment. So, the feeling and evaluation may be different for each review. So, while Softwave Lifting feels natural to some people, it may not be what others expected. These differences are often more concretely revealed in actual treatment experiences and case studies. 👇 Leave a question that suits your conditions What lifting treatment is right for my skin?
캐시닥 운영진26.02.11Views 81Likes 3 A quick look at the criteria for choosing a treatment to improve nasolabial folds: Why do reviews for the same nasolabial folds seem to offer different impressions and prices (including lifting)?
The wrinkles on the forehead Off , sag , fat distribution They often appear mixed together. So some people say, “I just filled in the volume,” and others say, “Lifting came first.” Even if it's the same procedure name Where did you touch it? This is the point where the feeling changes depending on the situation. There are three main approaches to improving nasolabial folds. 1) When pulling up with lifting False line Wrinkles caused by sagging upper skin There are cases where this applies. This is where the way you pull up can have an impact. Thermage: It tends to work mainly on the surface layer of the skin. If you have thin or dry skin When you are worried about ball puncture There are cases where this is considered. Well, well: It has a wide range of effects, from the skin to the deep layers. Overall facial sagging , it is often discussed in the context of the upper part of the eight characters coming down together. 2) When reducing and organizing the fat layer Above the eight-character line Convex-looking shape Sometimes, the trouble starts from here. At this time, changes in the fat layer may be involved. Wellthera / Onda Lifting: Cases where it affects the fat layer are mentioned. Coming Feel the change immediately , Less pain burden There are cases where it is talked about when one prefers . 3) When filling in the extinguished area wrinkles on the forehead Its own turn off This may be the main cause. At this time, the filling method is discussed. Jubelook Volume: If the wrinkles next to the nose are noticeable, When you are concerned about filler side effects There are cases where it is mentioned. Filler: This is basically the method discussed when targeting only the arm area. It is often compared with other options these days. Even with the same wrinkles on the forehead, there are points where choices differ. wrinkles It feels like the top of the line has come down recognition Does the arm area itself look sunken? The top is Convex-looking fat distribution recognition Whether you need a complete face change, Do you just want to see your fortune? Depending on these conditions, the explanation and direction of recommendation often vary. So in actual consultations, rather than saying “which treatment is better”, “ In this case, the following choices are discussed: The story tends to split in this way. 👇 See real visitor reviews Hongdae Dermatology Portra Lifting Procedure and Before and After Records I got botox for my nasolabial folds at the first dermatology clinic in Daegu, Mari Clinic.
캐시닥 운영진26.02.09Views 87Likes 0 What's different about the Shrink Universe compared to the original Shrink? A lifting design with MP mode and a pen-type handpiece.
Shrink lifting is already a well-known procedure, Facial curvature, fat distribution, pain, and treatment time There were quite a few people who felt regret. The shrink universe is like this The direction of 'structurally complementing' existing limitations This equipment appeared as . 1. What is Shrink Universe? 1-1. Background and appearance The existing shrink was a HIFU treatment device with high recognition. Afterwards, the second-generation model called 'Shrink Universe' was released and is currently being used in many hospitals and clinics. The exterior is slimmer than before and has a unique design, and is nicknamed ‘Lifting to the End of the Universe’ in the field. 1-2. The biggest difference: Pen-type booster handpiece The key change in the shrink universe is Pen type handpiece This is an introduction. Existing shrink → bar-shaped cartridge Shrink Universe → Pen type + ring-shaped shot structure This change causes the forehead, cheekbones, and temples to Close treatment even on areas with severe curves This has become possible. 1-3. The basic principle is the same (HIFU) Shrink Universe too HIFU (High Intensity Focused Ultrasound) Use the principle. Focusing ultrasound energy at a specific depth within the skin Creates a thermal coagulation point, irritating the skin since Collagen remodeling process Through This method induces lifting, tightening, and skin regeneration. 2. Key Improvement Points of the Shrink Universe 2-1. MP Mode: Change in stimulation method MP Mode (Micro-First Technology) is the most important technological change in the Shrink Universe. division freezing point structure Existing shrink 1 shot ≈ 17 (dots) MP mode 1 shot ≈ 400 (linear) Several points are connected like lines Higher stimulation density and more precise energy delivery This is possible. 👉 As a result Full lifting is in normal mode MP mode for specific areas (double chin, cheek fat, etc.) like Design by part is possible It's done. 2-2. Shortened treatment time & changes in perceived pain Shrink Universe is The procedure speed has been increased by approximately 2.5 times. Existing shrink: Approximately 10 to 15 minutes for 300 shots Shrink Universe: Approximately 3-4 minutes for 300 shots As the treatment time gets shorter, The perceived burden of pain was also assessed to have been reduced. There are many. 2-3. Cartridge configuration expansion (7 types in total) From the existing 5 types A total of 7 cartridges has been expanded to . 4.5mm : SMAS layer (fascia layer) 3mm : lower dermis 2mm : For eye area only 1.5mm : upper dermis 3 types of pen-type handpieces 👉 Accessible by floor and area Treatment design that divides the entire face into detailed sections It is possible. 2-4. Stability of the treatment in the curved area The existing bar-shaped cartridge has a bend in the area It's difficult to stick Embossing Burn risk Shot loss The same problem could have occurred. The pen type handpiece has a high adhesion even on curves. Aimed at reducing unnecessary shot loss and potential side effects There is this. 2-5. Ultrasonic focusing precision The Universe has more sophisticated ultrasonic focusing. Existing: Dot size is relatively large Universe: Finer and clearer coagulation point 👉 As the energy is transmitted accurately Perceived pain relief There is also. 2-6. Skin booster concept using ampoules Due to the nature of ultrasound treatment, gel is used as a medium. In the shrink universe, instead of gel Ampoule containing active ingredients There is also a way to utilize it. Glutathione Niacinamide adenosine PDRN hyaluronic acid Peptides, etc. → A total of 38 ingredient combinations 👉 With lifting A method that simultaneously improves skin texture and radiance 3. Disadvantages of existing shrinks and points for improvement 3-1. Concerns previously mentioned If you have thin facial skin → You may appear excessively thin When performing treatment on curved areas → Risk of embossing and burns Area adjacent to the nerve → Possibility of temporary numbness and discomfort (※ The frequency of occurrence is known to be low) 3-2. What's changed in the universe With a pen type handpiece Improved adhesion In MP mode Energy distribution design possible Expanded cartridge selection but, Results may vary depending on skin thickness, fat distribution, and surgical skill. It is important to understand this premise. 4. Timing of effect and summary 4-1. When will the effects be felt? The essence of shrink treatment is Collagen remodeling process no see. There may be an immediate tightening sensation, but The real change is It is explained that it appears gradually after about 3 to 4 weeks. It will work. 👉 Rather than being impatient An approach that observes changes over time This is required. 4-2. One-line summary Shrink Universe is MP mode, pen type handpiece, cartridge expansion Through This is an upgraded device that aims to complement the limitations of existing shrinks. Is this the right choice for my facial condition, expectations, and priorities? It is most important to understand the information thoroughly before making a decision.
캐시닥 운영진26.01.21Views 112Likes 0 
Liftera 2 Lifting: Why It's Called a Cost-Effective Treatment
If you look into lifting procedures, The first thing to consider is “How effective is it?” and “Is the satisfaction level reasonable for the price?” Liftera 2 is one of the ultrasonic lifting devices. Relatively affordable price range An immediate pulling sensation A structure that can precisely capture specific areas Because of this combination, it is often referred to as a 'good lifting technique to start with'. Rather than expecting drastic changes all at once, many people approach it as a steady lifting regimen. What is Liftera 2? ✔️ In a word, A treatment that focuses ultrasound waves on specific points within the skin to generate heat, thereby inducing elasticity and lifting. no see. ✔️ Basic features of the procedure Ultrasound waves are focused on one point like a magnifying glass and transmit heat. The heated area immediately contracts Afterwards, the skin regeneration process improves overall elasticity. 👉 This is why many people say they felt “tightened” immediately after the procedure. What are the key benefits of Liftera 2? 1) Fast treatment speed Compared to previous versions Shorter treatment time You may feel a prickling sensation, The entire procedure is completed quickly. 2) Output improvement In a relatively short period of time Use focused output Same time comparison The effect may feel better 3) Pen type handpiece Small and thin pen shape On the curves and narrow areas of the face Close-contact treatment possible 👉 Thanks to this structure Around the eyes, forehead, above the nasolabial folds, next to the mouth like It is especially useful for “areas that are not big but are concerning.” What is the difference from other ultrasonic lifting equipment? division Feature Summary Well, what a surprise Early equipment for ultrasonic lifting, Strong effect at once , the price burden is large Shrink Domestic equipment with the same principle, Overall, it's okay Liftera 2 Pen type structure, Sophisticated focus on specific areas , Accessibility for the price 💡 Selection Criteria Summary Once a year, strong lifting → Well, well Overall, decent management → Shrink Specific area + consistent care → Liftera 2 Where is Liftera 2 most commonly used? cheek lifting Sagging and sagging areas like a deep ball Around the eyes, forehead, and above the nasolabial folds Detailed areas such as back especially “My whole face is fine, but I’m concerned about this part.” In this case For testing and partial maintenance It is often chosen as . Treatment cycle and maintenance method Recommended cycle About once every four months Proceed with the concept of boosting Management style A feeling of tightness immediately after the procedure → lasts for about 4 months Before I feel sorry Lightly reinforced again If you repeat this, " Approaching sagging as a “preventive management” 📌 Rather than expecting a big change at once, A “little by little, often” management strategy It is a treatment that is well suited to . Pricing Reference Information (General Notes) commonly Based on number of shots It is often described as It is also said that there are 300 shots per part, 3,000 shots, etc. Depending on the event relatively low price range Sometimes it is introduced as ⚠️ The exact cost may vary depending on the hospital, composition, and event. Confirmation through individual consultation is required. do. What are the precautions and safety? ⚠️ Things to note In one area Excessive concentration city Rarely reported cases of burns Safety Information When performed by skilled medical staff It is known that there are not many cases of side effects. Overall High satisfaction rate treatment Mentioned as To summarize Liftera 2 is Ultrasound lifting is a great way to get started without any burden. Focused care for specific areas + consistent cycle care Suitable for Rather than a “one-time treatment” Maintenance and reinforcement-focused management options If this is your first time getting a lifting procedure, Rather than a big change The goal is to maintain elasticity ramen This can be summarized as an option that you may want to consider at least once.
캐시닥 운영진26.01.19Views 80Likes 0 Are high-frequency massagers really effective for lifting?
As home beauty devices become popular “Does this provide a lifting effect?”, “Does it smooth out wrinkles?” I get this question a lot. To start with the conclusion: It can be helpful, but dramatic changes like in advertisements are difficult to achieve. It is important to understand this point first. I will explain step-by-step why that is the case and what kind of expectations you should have. Why is there so much interest in high-frequency massagers? Convenient to use at home Recognized as a 'home care substitute' due to its affordable accessibility They often promote lifting, elasticity, and wrinkle improvement. but There is a significant difference in intensity between high-frequency devices used in hospitals and those used for home use. In that respect, expectations need to be adjusted. 1) Basic principles of high frequency “A technology that delivers heat to the skin using high-frequency waves” ⭐ Key Points Hospital, skin care clinic, and home devices There are three types. Medical use is used for purposes such as increasing skin elasticity and reducing fat, but Household models have lower intensity, so the range of action is different. 2) Household high frequency, Facelift-level lifting? This is the part that is asked the most in everyday life. 👉 Conclusion: It is difficult to expect a powerful lifting effect comparable to a facelift. The reason is clear. To create a change equivalent to a facelift Energy so strong that it is difficult to use on humans is needed Household appliances are for safety and daily use Output is significantly limited The actual change felt Improved circulation → Reduction of temporary swelling degree in other words, The reason the lines appear to lift is due to the swelling-reducing effect. It could be. 3) High frequency Is it possible to improve deep wrinkles? There are a lot of misunderstandings here, too. fine wrinkles → Possibility of looking slightly better due to increased elasticity deep wrinkles → Difficult to improve with a high-frequency massager Deep wrinkles Facelift fillers, etc. There are many cases where procedures are needed to address deeper layers. If you think of high-frequency devices as a 'wrinkle removal solution,' you will be greatly disappointed. 4) Is it okay to use radiofrequency after a facelift? There are so many questions. A machine that applies intense heat to deep layers, like ultrasound. It is best to avoid using it frequently. Lightweight high-frequency device → Available The most important point is → The facelift surgery itself Long-term sagging prevention Designed with the goal of In other words, just because high frequency wasn't used doesn't mean sagging will occur immediately. There is no need to use it excessively often. 5) Then, how should it be used? You will be most satisfied if you understand high-frequency massagers as 'supplementary care' rather than 'dramatic lifting.' 👍 It's good to think of it this way ✔ Improvement of temporary swelling ✔ Helps skin circulation Slight changes may occur with consistent use. 👎 If you expect this much, you'll be disappointed ✘ Facelift-level lifting ✘ Removal of deep wrinkles ✘ Changes in facial line shape Frequency of use There is no need to obsess. It is not recommended to use it too often. 6) Realistically, how effective are home high-frequency devices? To be precise: Because the strength itself is lower than that of medical use, the range of action is different. Reduced swelling + improved circulation → “Feeling good that day” Sustained increase in elasticity or changes in facial shape are limited. in other words, Home care aids Understanding it to that extent is the wisest way to use it. ✔ Organized at a glance Household high frequency is Reduced swelling and improved circulation A certain amount of help Powerful lifting like a facelift It is difficult to expect Improvement of deep wrinkles is It is difficult with the device alone. Lightweight devices can be used after surgery, but No need for excessive repetition Auxiliary Home Care Understanding it as such is the most realistic approach.
캐시닥 운영진26.01.15Views 127Likes 0 Thermage vs. Oligio: A Lifting Decision Guide Comparing Effectiveness, Duration, and Cost
When considering a lift, the first question you encounter is, “Is Thermage better? Is Oligio sufficient?” The two procedures are Although the principle is similar, the difference in the 'cooling system' is the key factor that separates the actual perceived effect and duration. Therefore, the choice may vary depending on individual circumstances. Strong effect · Long-lasting → Thermage (Based on once a year) Affordable and frequent subtle effects → Oligio (Based on 2-3 times a year) The two procedures have the same basic principle, but Differences in cooling systems are the key criteria for distinguishing 'effect intensity and duration'. no see. It is best to make the choice that suits you best based on your budget, skin condition, and desired lifting level (strong/gentle). 1) Reasons to compare the two procedures Although there is a big price difference The annual cost is similar to what I expected. do. The principle is similar, but There is a difference in energy transfer capacity . Depending on maintenance period, number of shots, and repetition cycle Who suits me better Change. 2) The basic principles are almost identical Both devices transmit monopolar RF (high frequency) via contact. RF energy creates heat inside the skin With that fever Collagen denatures and contracts → density increases during the regeneration process Up to this point, the two procedures are almost the same. 3) Key Difference: “Cooling System” Because lifting equipment generates intense heat cooling device is essential. however, Oligio : Stronger cooling Thermage : Heat transfer capacity is maintained at a higher level Consequently, even with the same principle, Thermage delivers a higher intensity effect. You will be able to do it. Many specialists The effect of Oligio is about 70% of the level of Thermage. The reason for evaluating it as such is also explained here. 4) Comparison of Duration & Treatment Interval Maintenance period Thermage Since the maintenance period is longer, once a year is recommended. Oligio : Short duration of effect, so repeated procedures are the basic assumption Recommended interval Oligio 300 shots : One month interval × approximately 3 times Oligio 600 shots : 2~3 times a year Thermage : Once a year Effect flow Thermage Both the peak effect and the duration are longer. But Oligio 2 to 3 procedures at 6-month intervals underneath In some areas, the perceived effect may be higher than Thermage. in other words, Strong effect + long-lasting → Thermage If you want to receive something gentle but often → Oligio 5) Price Comparison: The difference is smaller than expected when viewed on a one-year basis. If you look only at the price per episode Thermage is much more expensive. However, it lasts for a long time. Once a year is enough Oligio has a short duration of effect. Naturally recommend 2 to 3 times a year conclusion: When calculated on an annual basis, “the price difference is not very large.” 6) Which procedure is suitable for whom? ✔ Recommended Thermage Cases When you want a stronger effect When you want to receive it only once a year When considering the maintenance period as important ✔ Oligio Recommended Cases If you are on a tight budget and want a light 'one-time experience' In cases where sagging is not significant, like in the early 20s If you want to experience a subtle effect periodically 7) Precautions when deciding on a lifting procedure There is no absolute answer, and Skin thickness, elasticity, and target effects It depends on Even with the same equipment, the perceived effect may vary depending on the doctor's method, number of shots, and intensity. Before the final selection, The process of receiving consultation based on your current skin condition is important.
캐시닥 운영진26.01.14Views 111Likes 0 Considering a facelift procedure for those in their 20s and 30s? A practical guide that carefully considers cost, effectiveness, and necessity.
Lifting by following what others do is dangerous. Decision in the order of necessity → availability → selection of alternative If fat accumulation is the root cause, then fat management comes first. The procedure is safe as it involves minimal shots and is performed only on the necessary areas. 1. Is face lifting really necessary for young people? Interest in lifting procedures is increasing among the younger generation (20s and 30s), but the first thing to check is, “Is it really necessary?” First of all, it is often chosen because of anxiety or trends. Determination of necessity → Determination of capacity The order is most important. ✔ Basic principles of lifting treatment Ultrasonic and high frequency equipment Using heat to induce collagen regeneration and uses a method that tightens the skin. However, the reason for the high cost is mostly Consumables (Tips) This is because the cost is high, and the equipment itself is sometimes expensive. ✔ “Because others are doing it” is a dangerous start. If you start a procedure without assessing your own need, you are likely to regret it in terms of cost, side effects, and effectiveness. 2. If deemed necessary? → Choose minimal risk with a “cost-effective” strategy ✔ If you have the capacity You can proceed with the equipment you want (e.g. Ulthera), but the cost is high. ✔ If your capacity is limited One step lower substitute It is a rational strategy to choose . example) Well then → Shrink Replace with copy equipment such as The number of shots is not a 'full shot' Just the minimum unit like 200 shots , apply only to the areas where it is absolutely necessary “It’s the same principle as only eating one serving of beef even if you want to eat it.” → Not excessive, just as much as necessary 3. Why is ‘prevention’ more important for those in their 20s and 30s? The youth period is not a stage to lift an already sagging face, but rather a stage to 'manage it so that it does not sag in the future.' ✔ The root cause of sagging skin Heavy fat (cheekbones, cheeks, double chin, etc.) falls down. This is because the structure that supports it (SMAS, skin) is sagging. No matter how much you take care of your skin, When the weight of fat is large, sagging is bound to occur easily. ✔ The most important basic care when you are young Moisturizing UV protection These two things are very important to slow down the rate at which your skin sags like pants. 4. What if the line breaks down due to fat? → Resolving the cause is the priority If you already have heavy fat accumulated, it is difficult to solve the problem by simply tightening the skin. Fat Reduction Methods (Examples of Surgeries/Procedures) aka, egg surgery : Directly suction and remove fat aka N-ting injection : Possible methods to reduce fat Both ways Resolve the cause of line collapse by removing sagging fat It may help you do so. 5. Why a minimum shot strategy is important → Reduce costs + reduce side effects The most common mistake among young people is Taking too many shots to unnecessary areas no see. ✔ Why side effects occur after ultrasound treatment It's not because I 'don't have' cheek fat If the ultrasound is not properly focused near the ligament, the ligament may contract strongly and appear to be torn. → So Minimal shots, only to the areas that are absolutely necessary It is a wise strategy to do so. Conclusion: The misconception that “you need to lift because you’re young” Determining necessity comes first When budget is limited, the minimum shot strategy is an alternative. If fat is the cause, fat resolution treatment comes first. Moisturizing and UV protection are essential at every step. The most stable approach is from a preventive perspective. ※ This guide is explained in the scope of “Basic advice to help you prepare in advance before you fall too much.” ※ Treatment selection may vary depending on individual condition, goals, and budget, and it is recommended to make a decision through professional consultation.
캐시닥 운영진26.01.14Views 64Likes 0 Should I Try Thread Lifting? Essential Guide to Know Before You Begin[1]
Facelifting is a procedure that can easily lead to high expectations due to its simple image as a 'face-lifting procedure'. But in reality Predicting the effect → administering the appropriate amount → understanding the side effects If you check these three things first, you are more likely to not regret it. The content below is Predicting the effects of thread lifting, side effects, maintenance period, and actual concerns that frequently appear in reviews It's just been organized. What is thread lifting? (Definition & Principles) Silifting is A procedure that pulls the skin, muscles, and fascia layers that have sagged forward and downward with age toward the back and upward. no see. It is often chosen for sagging that cannot be resolved with fillers or fat grafting. Even if it's the same thread lifting The effect varies greatly depending on the degree of sagging and skin thickness. It is. Types of thread and their shelf life The thread used Ingredients, length, thickness The maintenance period varies depending on the PDO thread : approximately About half a year I think it will melt after a while PLA yarn (e.g., Silo's Soft) : approximately About a year and a half I think it's melting after that The softness of the silk Transparent, thin, and long It is used in a way that it penetrates the scalp, People who value the maintenance period This is my preference. How does pain occur during and after the procedure? In the beginning tingling sensation , when speaking or yawning Discomfort due to movement around the mouth This can happen. If the thread is close to your mouth Tingling/stinging when speaking The feeling may become stronger When performing jawline surgery Too close to the mouth is often avoided Can I predict the effects of facelifting first? What doctors actually recommend Self-diagnosis method There is this. ✔ Gently pull the skin in front of your ear If it spreads out → you can expect results If there is little change → the sagging is not great, so the effect may be small Forcibly pulling it 'all the way' Not a thread lifting effect People with a lot of flesh or a full face may not be able to pull it up well. 📌 Why is it important? Many people Sagging of the sides of the mouth (nasolabial folds, etc.) I think based on The actual thread lifting is The key point is the front ear pulling response. Because it wins. Common Myths vs. Reality About Facelifts With just one thread lifting Sagging + Volume + Fine Wrinkles There are many expectations to solve all of them, but I don't think it's very effective at solving wrinkles on the arms. This is not a treatment that completely solves the problem of eye area, cheekbones, and nasolabial folds. If you pull too hard, your face may look unnatural. Especially the way he grabs the clown and pulls his eyes out as if they are being torn apart Unwanted facial changes can be created 3 Key Things You Need to Know Before Your Procedure 🟦 ① Effect prediction Looking in the mirror Pull the front of your ear slightly to change the range of motion check The forced pull is not the actual result. 🟦 ② Appropriate amount without overdoing it Adding more thread doesn't mean it goes up more Excessive treatment → Changes in facial shape, prolonged swelling, and increased discomfort Because it actually melts in the end Use in moderation This is important 🟦 ③ Side effect control Serious side effects are rare, but include: Discomfort that can become a stress point There is silver. Tingling around the mouth when speaking Long-lasting swelling bruise You may not like the shape of your skin folds Knowing this possibility It is advisable to make a decision after sufficient consultation. do. Checklist before thread lifting ✔ With a pull-in response in front of the ear Predict in advance whether it will be effective on my face ✔ Avoid procedures that excessively increase the number of threads ✔ Swelling, bruising, pain around the mouth, etc. Be aware of the possibility of minor side effects ✔ The maintenance period varies depending on the type of yarn (PPDO/PLA)
캐시닥 운영진26.01.08Views 89Likes 1 Complete analysis of the characteristics and differences in treatment methods for each area of thread lifting (including PDO and COG thread types)[4]
thread lifting , these days Non-surgical anti-aging It is a treatment that many people seek out, so much so that it is called the representative treatment. Especially the main cause of looking older sagging, loss of elasticity It is effective in catching male customer base It's also increasing more and more. however thread lifting Did you know that not all of them are the same?🤔 The skin thickness, fat density, and muscle direction of each area of the face are completely different, so the type of thread and treatment method are different for each area. In this article Features of each part class What kind of thread is used? , I've carefully organized how the procedure is performed.☺️ [1] Forehead/Between the eyebrows – Thin and sensitive area, delicate lifting Forehead and between the eyebrows The skin is thin and the facial muscles are active. Areas where deep wrinkles are likely to form are you. Also, as the eyebrows droop, the eyes become heavy and give a stuffy impression. In this area, you can expect the effect of slightly lifting the eyebrows with a thread lift, which will open up your field of vision and make your impression look much softer. The type of thread is less irritating PDO Monosil Ina PLLA shortcog thread This is mainly used. Thin thread X or U Cross them in the form, and in some cases Botox or filler We also run them in parallel. It is possible to improve forehead wrinkles with natural lifting. [2] Eye area – Key points for improving fine wrinkles and micro-lifting Eye area The skin on the face is the thinnest and most sensitive part of the body. So the thread thickness, insertion depth, and direction Very sophisticated It needs to be adjusted. Mainly 25G~30G ultra-fine thread Ina Twisted yarn This is used and inserted diagonally from the outer corner of the eye towards the temple. Fine wrinkles through thread lifting At the same time, slightly raise the corners of the eyes. Clear eyes I can make it happen. Especially for middle-aged and older people, it induces collagen regeneration. PCL microthreading By using it, you can get both the effects of improving durability and elasticity. [3] Cheek/Nasolabial folds – Sagging cheeks and deep nasolabial folds, solved at once nasolabial folds As this deepens and the cheeks sag, the center of the face appears heavy, making you look older. So, this area has the highest demand for thread lifting. As it is wide and has a rich fat layer, it has a strong pulling power. Cog thread Ina Mesh yarn The same thread is suitable. Insert it deeply from under the cheekbone toward the corner of the mouth to lift up the cheeks, and on the nasolabial area V-shape Fill in the naturally sunken areas by inserting thread into the shape. PLLA cogsil If you use it, the lifting effect lasts longer, Cavensill It can even improve the volume of the turned off sound. This is one area where the combination of thread types is particularly important. [4] Jawline/V-line – Improves contour and double chin sagging jawline And the blurred V-line blurs the overall impression of the face. Thread lifting is particularly effective in sculpting this area. Starting from behind the ear or under the chin, insert the thread along the outline of the face. Lifting is done by pulling from the outside to the inside, from the bottom to the top. This part has excellent tension and fixation. PCL Cogsill Ina PLLA long cog thread This is mainly used, To improve double chin, pull up the fat layer at the same time. Cavencog Sil This is effective. Advanced lifting that brings out a soft, natural look Silhouette Soft Concealer It is also frequently used. ✅ See the types of thread by part at a glance region Main types of yarn characteristic Forehead/between the eyebrows PDO Monosil, PLLA Shortcog, Silhouette Soft Suitable for thin and sensitive skin Eye area PDO monothread, PCL microthread, twist thread Effective in improving fine wrinkles and volume Ball/palja PDO/PLLA cog thread, mesh thread, cavern thread Simultaneous pulling and volume improvement possible Jawline/V-line PCL/PLLA Cogsil, Cavancog, Silhouette Soft Strong lifting + natural contouring Conclusion - Knowing the Right Thing About Thread Lifting Increases Satisfaction thread lifting It is not a simple procedure that involves inserting threads, It is necessary to properly understand the anatomical characteristics of each facial area and apply the appropriate thread type and surgical method. You can see a natural yet long-lasting lifting effect. Features by part If you understand and choose the treatment that is right for you, You can reduce your worries about aging and achieve a natural youthful look, right? Before the procedure, be sure to have a thorough consultation with a specialist. 'Where, what thread, how' Please consider carefully whether to use it.☺️ ---------------- ✅Go see Cashdoc's real-time TOP 10 popular lifting procedures!🎀 ✅Silifting Want to know more about? 👉 A Complete Guide to PCL Features – Elasticon and Other Thread Lifting Thread Brands 👉 Summary of PLLA Features - Comparison of Thread Lifting Effects by Brand, Including Silhouette Soft 👉 Complete summary of PDO characteristics – PDO thread lifting thread types and effects
캐시닥 운영진25.06.25Views 988Likes 3 A Complete Guide to PCL Features – Elasticon and Other Thread Lifting Thread Brands[1]
Silifting is a skin lifting Direct pulling effect Because it is big Especially for those who were not satisfied with laser lifting High satisfaction rate treatment no see. Among them, the most Boasts long-lasting effects The lifting thread is PCL component no see. In this article PCL Summarize the features, Actually used a lot Elasticon I'll introduce the same brand together.☺️ [1] What is PCL (Polycaprolactone)? – Long-lasting biodegradable fiber PCL It is a biodegradable polymer material that slowly breaks down in the body, and is one of the ingredients used in thread lifting. Boasting the longest maintenance period do. The decomposition period is At least 24 months by, Sustainable lifting It is a very suitable material for those who want to. [2] Provides strong support to deep skin layers PCL thread is firm and pulling Strong power Supports and pulls deep into the skin. Lifting Depth This is definitely different. [3] Excellent collagen regeneration effect In the process of decomposition Stimulates collagen production in the skin So Improvement of skin texture, restoration of elasticity, reduction of wrinkles, etc. The skin's own resilience It will pull you up to . [4] Maintenance period – 24 months or more Long-lasting effects For those who find repeated treatments burdensome, A cost-effective choice no see. [5] Naturally adheres to skin expressions and movements It is in close contact with the muscle layer and is also effective in facial movements. Naturally maintains lifting lines It will work. [6] Relatively less pain, swelling, and foreign body sensation Immediately after the procedure, there may be pain, swelling, or foreign body sensation. Side effects are relatively few and recovery is fast. no see. [7] Representative brand – Elasticon Elasticon It is a high-performance lifting thread based on PCL component. Long lasting power It has strong fixing power, deep skin layer lifting, and is also effective in restoring skin texture. [8] This is a high-difficulty procedure, so experienced medical staff is required. Because the thread may be inserted too deep or too shallow, side effects may occur. With accurate anatomical knowledge and surgical experience It is important to receive treatment from a professional do. Conclusion – Deep and Long-Lasting Lifting: Choosing PCL Thread PCL Features It has strong support, deep skin action, collagen induction, and lasts for more than 24 months. Choosing a high-performance brand like Elasticon and customizing your design can make a significant difference in your skin lifting satisfaction. ----------------------------- ✅Go see Cashdoc's real-time TOP 10 popular lifting procedures!🎀 ✅Silifting Want to know more about? 👉 Thread Lifting Q&A Part 1 🎀 Members curious about thread lifting, come join us!😄 👉 I had a thread lifting procedure at a dermatology clinic in Gangnam Station!
캐시닥 운영진25.06.24Views 586Likes 2 Summary of PLLA Features - Comparison of Thread Lifting Effects by Brand, Including Silhouette Soft[1]
Among lifting procedures, Natural and long-lasting If you want results PLLA thread lifting It is worth noting that: In this article PLLA Summarize the features, It's a brand that's actually used a lot. Silhouette Soft Including I'll kindly explain what makes it different.☺️ [1] What is PLLA? – A long-lasting lifting ingredient PLLA (Poly-L-Lactic Acid) is a biodegradable substance that breaks down slowly in the body. Once inserted into the skin, it lasts for approximately 18 to 24 months. Slowly decompose And, In the process Induces collagen production It gives elasticity and vitality to the skin. [2] Long-lasting effect – up to 2 years PLLA thread lasts for 18 to 24 months And, In some cases, the effects last for more than two years. [3] Unique structure – cone-mounted chamber Silhouette Soft is Corn It has a structure that firmly fixes the organization, It is effective in redistributing sagging fat layers upward. [4] Collagen production + improved volume PLLA induces the regeneration of the skin itself. Collagen is produced in abundance Simultaneous improvement in skin texture, elasticity, and thickness It will work. [5] Applicable to various areas Forehead, cheeks, jawline, nasolabial folds, neck, etc. Can be used in various areas And, especially Sagging cheeks or contour lifting It is effective in . [6] Silhouette Soft – Leading PLLA Brand Silhouette Soft is a representative brand of the PLLA series, Cone-shaped structure and forcible Collagen induction action, FDA and CE certified stability It has . [7] There are also disadvantages – accurate treatment is important If the thread is inserted too shallow, the cone may be visible or palpable. 'Dimple' phenomenon Because this can happen Treatment by skilled medical staff This is required. Conclusion – Deep Lifting, Advantages of PLLA Thread PLLA The features are Powerful collagen production, long-lasting effect, three-dimensional volume enhancement, Natural skin regeneration effect no see. Threads with cone structures like Silhouette Soft We provide definite results and provide consultation with experts with extensive design capabilities and experience. You can expect the best results. ----------------------------- ✅Go see Cashdoc's real-time TOP 10 popular lifting procedures!🎀 ✅Silifting Want to know more about? 👉 Thread Lifting Q&A Part 1 🎀 Members curious about thread lifting, come join us!😄 👉 My review of a beak-shaped nose correction procedure done with a nose lift at a Shinsa Station clinic.
캐시닥 운영진25.06.24Views 501Likes 2 Complete summary of PDO characteristics – PDO thread lifting thread types and effects
Anyone interested in skin lifting has probably heard of thread lifting at least once. Among them, the most popular and widely used ingredient is PDO (Polydioxanone) no see. In this post, we will list down the main features of PDO component lifting threads by number. We'll provide you with detailed information on the major brands used in actual procedures.☺️ [1] Inducing collagen production – a thread that works naturally within the skin PDO threads are naturally broken down in the body. absorbent ingredients by, After a certain period of time after insertion, the body It melts away on its own. But it doesn't just disappear. Within the skin tissue while it is being broken down Induces collagen production and Natural and elastic Lifting effect It creates. [2] High flexibility, less foreign body sensation PDO thread is very flexible due to the nature of the material. When inserted into the skin There is almost no foreign body sensation , has the advantage of settling in naturally. Even for those with sensitive skin or those who are new to lifting procedures Can be applied without burden safe room is evaluated as [3] Immediate physical lifting effect PDO threads physically pull up sagging skin. Excellent support do. Because it pulls up sagging tissue from within the skin layer, noticeable immediate effects You can expect. [4] The maintenance period is 6 to 12 months on average. It varies depending on individual differences and skin condition, It usually lasts from 6 months to a maximum of 12 months. [5] Various lengths and designs – Customized treatment for each area possible PDO thread Various thicknesses, lengths, and designs It can be produced with . By area such as forehead, eye area, nasolabial folds, jawline, etc. Custom design It is possible, It can be applied precisely even to areas that require fine adjustment. [6] Low safety and side effects concerns Because PDO threads are a naturally decomposing component in the body, There are fewer concerns about side effects and recovery after the procedure is quick. [7] Introduction to PDO brands actually used - Mint Lift: High-elasticity PDO thread approved by the US FDA - Epiticon: A thread that has both flexibility and fixation - QTL thread: Excellent evaluation in terms of skin adhesion and retention power Conclusion: Design and experience are more important than yarn selection. PDO thread lifting For those trying it for the first time It is a good option to approach without burden. But what's important is not what thread is used, but who does the procedure. Our experienced medical staff analyzes skin elasticity, facial structure, etc. to design the optimal treatment. Skin lifting is not a simple procedure, but a process in which design is important. If you make a precise plan, you can do it with just PDO thread. Satisfactory lifting effect You can experience it. ----------------------------- ✅Go see Cashdoc's real-time TOP 10 popular lifting procedures!🎀 ✅Silifting Want to know more about? 👉 Thread Lifting Q&A Part 1 🎀 Members curious about thread lifting, come join us!😄 👉 Honest review after 2 weeks of Mint Thread Lifting at Gangnam Station Dermatology Clinic!
캐시닥 운영진25.06.24Views 468Likes 2 Ulthera before-and-after photos are amazing! Beware of side effects if you use it frequently 🚨[15]
Ulthera is a consistently popular treatment among those who want to increase skin elasticity and achieve a lifting effect. Although the satisfaction level for the post-procedure effects is high, it is a procedure that can have side effects if performed too frequently. In this article, we will discuss the opinions of Cashdoc community members. Wellthera before and after photos Through Ulthera reviews, effects, side effects I'll let you know! What is Ulthera? Well, it's called A lifting treatment that uses high-intensity focused ultrasound (HIFU) to deliver energy to the deep layers of the skin to stimulate collagen production. Here it is. As time passes after the procedure, your skin will become firmer and have a lifting effect. It's particularly effective on the forehead, jawline, and cheeks, and is excellent for improving sagging skin. When does the Ulthera effect start? The final effect of Ulthera is 2-3 months after the procedure After this, you can experience your skin being at its most firm and lifted. Immediately after the procedure You may feel a slight tightening sensation, along with a tightening sensation on your skin. There may be some redness or mild swelling, but this does not significantly interfere with your daily life. - Junss1955's before and after photos of Ulthera (Day 2) 2-3 weeks after the procedure After this point, collagen production begins in earnest, gradually improving skin elasticity. You can feel the effects of facial lines such as the jawline, cheeks, and nasolabial folds becoming more defined. - Before and after photos of Yamiyami's Ulthera (1 month) 2-3 months after the procedure Well, the effect of Ulthera is definitely visible, and you can feel the change of your facial lines becoming more defined and your skin becoming much smoother. How long does the Ulthera effect last? The effects of Ulthera last from 6 months to more than a year. The results may vary depending on individual skin condition and lifestyle habits. In particular, consistent moisturizing, UV protection, and maintaining a healthy lifestyle can help maintain the effects for longer. Well, if you do it often, there are side effects. While Ulthera is effective, it can cause side effects if used indiscriminately and frequently. During the procedure, ultrasound energy is delivered deep into the skin, and if used excessively, it can damage skin elastic fibers. Therefore, If you use Ulthera frequently, side effects may include sunken cheeks, sagging skin, burning sensation, and changes in skin tone. This may happen, so be careful. - Natural person's side effects (ball pain) Medical staff usually It is recommended to receive Ulthera treatments every 6 months to 1 year. Yes. This is because during this period, the skin recovers sufficiently and collagen production is maximized. Tips after Ulthera treatment ✅ UV protection It is essential - you must apply sunscreen thoroughly as your skin will be sensitive after the procedure. ✅ Moisturizing care - Use plenty of moisturizing cream as hydration helps skin recover. ✅ Avoid saunas and strenuous exercise - To reduce skin irritation, you should avoid strenuous exercise and saunas for about a week after the procedure. ✅ Maintaining intervals between re-treatments - To maintain the effect, it is most important to receive the treatment at the recommended interval. Ulthera is a treatment I recommend to those concerned about sagging skin. However, overdoing it in pursuit of results can actually lead to side effects, so please maintain proper intervals and manage it safely. If you're considering a facial lift, consider Ulthera! 😝 ------------------------------ Ulthera Lifting Lowest Price Information If you're curious? 👉🏻 Shinsa Egg Clinic (2024) | Shinsa Station Ulthera Lifting 👉🏻 Mind Plastic Surgery (2024) | [Mind] Mind X Ulthera Lifting 👉🏻 Dream Plastic Surgery Clinic (2024) | Ulthera
캐시닥 운영진24.11.12Views 17448Likes 8 Thread Lifting Q&A Part 1 🎀 Members curious about thread lifting, come join us!😄[16]
📌 Thread Lifting Q&A Part 1 🧡 Dream Plastic Surgery Clinic Director Jang Jun-cheol's column 👨⚕️ ✨This is a picotoning Q&A column that makes you smarter the more you know! " Viewmae, tell me " We have collected the questions you wrote at the event. Dr. Jang Jun-cheol, Director of Dream Plastic Surgery Clinic You directly! Thank you for writing the answer 😎 So, shall we learn about thread lifting together? GO GO~ ✍ 1. What are the effects of thread lifting?! 😉 "As I get older, I worry about wrinkles on my face and sagging skin. This is the first time I've heard of thread lifting. I'm curious to know how effective the procedure is for sagging skin and wrinkles! " "You probably know that people experience physical aging sequentially over time." The areas where aging can be seen most quickly are the external appearance, such as the skin and hair. Among them In the case of skin, sagging due to wrinkles and loss of elasticity This appears. thread lifting By inserting a thread with a silver protrusion or cone into the human body. This refers to a procedure that lifts up sagging tissues such as protrusions or cones. Because the procedure is performed using melting thread and small needle holes, The procedure is simple and recovery is quick. has its advantages. 2. What are the types of thread lifting? 🎀 " Among the thread lifting, there is something called mint thread lifting. I think it's done a lot on the wrinkles on the arms. Are there different types of thread lifting? thread lifting All threads used in the procedure will naturally Thread that dissolves in the human body It is made of. The melting time varies from person to person. 1 year ~ 1 year and 6 months as I am looking at it and the maintenance period is the same as the time when the thread melts. ❗Types of thread❗ PDO thread, Mint thread with protrusions, Silhouette Soft with cones, and Cavendish thread for volume until There are many different types of thread, each with its own unique characteristics and thickness. Criteria for choosing thread✨ It varies depending on the individual's skin condition, degree of sagging, and especially the area that needs improvement. Sometimes, two or more types of thread are mixed and applied differently to different areas. Types of thread lifting 1️⃣ Mint Secure the skin in all directions with a thread with 360-degree protrusions Excellent lifting effect and strong lasting power I am proud of it. 2️⃣ Silhouette Soft - A special room with cones, where the cones move between knots. It is positioned in the appropriate skin position. The cone is fixed 360 degrees inside the skin. It is less stimulating and more natural when changing facial expressions. Information about the thread lifting process can be found in Part 1 of the Q&A on Arm Fillers. 💌 Want to learn more about the threadlifting process? Click click👆🏻👆🏻 3. Does thread lifting hurt? 💨 "I saw a girl around me who had a facelift and she said it was painful. Is the thread lifting procedure originally painful or is it painful because it was done incorrectly? I'm curious! " Benefits of thread lifting silver Short treatment time, fast results, and short recovery period no see. The degree of pain varies greatly from person to person, so it is difficult to say how much it hurts. It's hard to define, but Recently, it is performed under general anesthesia Because There is no pain during the procedure. .😲 (However, bruising or swelling may occur depending on the individual.) If you put a strong thread into the jaw where the masseter muscle is, Opening your mouth wide or chewing for a day or two It may be uncomfortable, but it will get better within a few days. 💚For misconceptions about thread lifting, please refer to the YouTube video below!💚 4. How long does a facelift procedure take? ⏰ Is it possible to live a normal life like this? " How long does a facelift procedure take? I wonder if I can go back to my daily life right after the procedure! " thread lifting Treatment silver Performed under general anesthesia And while you sleep About an hour as It takes a short time . Office workers come and receive it during lunch time ❕❕ is. Because it is a direct procedure that is inserted directly into the skin and pulled up, compared to the short procedure time, Effective for sagging face, stretched facial lines, and nasolabial folds is pretty good. Bruising and swelling also vary from person to person, but bruising occurs when thread is injected. It's a bruise the size of a syringe needle. The swelling will go down within a few days. . After the procedure, do not open your mouth wide or eat hard foods. You may experience discomfort for a few days. 5. The procedure of the thread lifting procedure Is there a right time?✨ " I wanted to try a facelift Many people said it was still too early and that we should wait a little longer. I am in my early 40s now. When is the best time to get the procedure done? thread lifting Treatment The age group receiving it is From 20s to 70s It varies. Also, depending on the skin condition and degree of sagging, Synergy by performing another procedure together ➕ cast I also bet. For example, for wrinkles on the nasolabial folds, a greater effect can be expected by using nasolabial fold filler. Sunken cheeks can be treated with fillers or fat grafting. Double chin can also be treated with liposuction.🤓 Appropriate treatment at the necessary time What you are doing If you are starting to worry because the prognosis is good and recovery is fast, One way to manage aging by I recommend that you undergo the procedure. 'Thread lifting provides effective lifting with just one procedure!' Did you learn a lot? ✍(◔◡◔) " Viewmaeya Let me know event" We have collected the questions you have written in Director Jang Jun-cheol Please answer directly god Thread Lifting Q&A It was It's here! I can hear the sound of our members' knowledge accumulating💛 Well, we'll see you in the next column! Director Jang Jun-cheol Director of Dream Plastic Surgery plastic surgeon Graduated from Korea University College of Medicine Former clinical professor at Korea University Medical Center Doctor of Medicine, Korea University Graduate School Regular member of the Korean Society of Plastic and Reconstructive Surgeons Regular member of the Korean Society of Aesthetic Plastic Surgery
캐시닥마스터23.04.10Views 3048Likes 3
